|
Quantity
|
Total
|
||
|
|
|||
|
|
|||
LaboGene HeatControl SHC 2000-1 Circulating Thermostat is an immersion circulating thermostat for precise temperature control in a laboratory bath or an external temperature circuit.
Intended use
The controller is bridge-mounted on a compatible heating or cooling bath. It combines PID regulation, electric heating and a circulation pump for in-bath or external-device temperature control.
Key capabilities
- stable PID temperature regulation
- 2000 W heating capacity
- circulation up to 17 L/min at up to 350 mbar
- bridge mounting on a compatible HeatSafe or ChillSafe bath
- external circuit connection using a separate kit
Confirmed specifications
| Catalogue number | 703690 |
| Version | HeatControl SHC 2000-1, 230 V / 50 Hz |
| Control | PID |
| System working range | approximately −35…+150 °C depending on bath |
| Set-point accuracy | 0.5 °C |
| Calibration resolution | 0.1 °C |
| Temperature stability | ±0.1 °C |
| Heating capacity | 2000 W |
| Pump capacity | up to 17 L/min |
| Pump pressure | up to 350 mbar |
| Safety class | 3 |
Compatibility and available accessories
| Cat. No. | Item |
|---|---|
| 704332 | External circulation kit for SHC 2000-1 |
| 7002500312 | HS/CS silicone hose, 1 m |
| 7002500313 | Insulated HS/CS silicone hose, 1 m |
System selection
For selection, specify the required temperature, bath type and volume, heat-transfer fluid, heat load, external circuit length and the device to be temperature-controlled. Final specifications and scope of supply are confirmed in the order specification.