|
Quantity
|
Total
|
||
|
|
|||
|
|
|||
Xenios 2.0 provides extracorporeal support in veno-arterial and veno-venous configurations with continuous blood flow. Its operator unit has a 10.4-inch touchscreen and monitors the pump drive and circuit sensors. The disposable set, backup drive and transport equipment are selected for the intended application.
Key benefits
- Guided setup and circuit priming.
- Graphical trends and alarm history with guidance.
- Four pressure channels plus flow, air and temperature monitoring.
- Two battery packs support hot-swapping.
- Backup operation with a second drive and battery packs when configured.
- RS232 interface for PDMS integration.
Technical specifications
| Model | Xenios 2.0 |
|---|---|
| Support configurations | VA / VV |
| Display | TFT touchscreen, 10.4″ |
| Operator unit weight | 8.5 kg |
| Weight with compact holder | 11.5 kg |
| Operator unit W×H×D | 290×300×369 mm |
| With compact holder W×H×D | 290×300×615 mm |
| Pump drive speed | 0–10 000 rpm |
| Pump heads | ⅜″ / ¼″ |
| Pressure sensors | 4 × −680…+600 mmHg |
| Temperature sensor | +10…+45 °C |
| Operating time with 2 battery packs | 120–420 min, operating-condition dependent |
| Manufacturer battery example | 260 min at 5.5 L/min and 6500 rpm |
| Power supply | 100–240 V AC, 50/60 Hz |
| PDMS | RS232 |
| Inter-hospital ground transport | With separately specified MSG system |
Applications and configuration
For an extracorporeal support department. Specify the disposable circuit, oxygenator, pump head, cannulae, gas supply, second pump drive, cart, compact holder and MSG system. The photograph shows a cart configuration; its equipment is not automatically included. Battery duration depends on flow and pump speed. Permitted treatment duration follows the disposable device instructions, and service life is not a warranty period. PDMS integration requires agreement with the hospital system. Request a configuration-specific quote.
Compare with: Getinge Cardiohelp System.