|
Quantity
|
Total
|
||
|
|
|||
|
|
|||
EMSAS EPT 6 is a plasma thawer for up to 6 sealed bags in a 20 L water bath. Silicone pockets separate the bags from the bath water. The operating range is +5 to +45 °C.
Capacity6 bags
Bath volume20 L
ControlPID
Key benefits
- Silicone pockets prevent direct contact between sealed bags and bath water.
- Vertical platform movement and water circulation support heat transfer.
- Microprocessor control uses PID temperature regulation.
- The 20 L bath has a drain valve.
- The electric heater is separated from the water and loaded bags.
- Delayed start, a timer and automatic completion support a repeatable procedure.
Technical specifications
| Model | EMSAS EPT 6 |
| Type | Plasma thawer with silicone pockets |
| Operating range | +5…+45 °C |
| Capacity | Up to 6 sealed bags |
| Bath volume | 20 L |
| External dimensions (W × D × H) | 362 × 333 × 410 mm |
| Packing dimensions (W × D × H) | 540 × 440 × 540 mm |
| Gross weight | 30 kg |
| Bath material | Cr-Ni 304 stainless steel |
| External cabinet | Coated galvanised steel |
| Insulation | 17.5 mm rock wool |
| Bag holders | Silicone pockets |
| Heating | Electric, 300 W |
| Control | Microprocessor, PID |
| Temperature sensor | NTC |
| Water circulation | Yes |
| Water drainage | Drain valve |
| Delayed start | Yes |
| Timer / completion | Timer and automatic completion |
| Electrical supply | 220 V / 50 Hz |
| Platform movement | Vertical |
Applications and configuration
For controlled thawing or warming of compatible sealed plasma bags in blood banks and medical laboratories. Validate the cycle for the bag type, starting temperature and actual load using the facility’s approved procedure.
The 20 L figure is bath volume, not blood-product capacity. Cycle duration and compatibility with individual blood or cell products must be confirmed for the intended process. Confirm bag format, supply configuration and warranty before ordering.