UP3D F20 zirconia sintering furnace

Description

UP3D F20 is a dental zirconia sintering furnace with a touchscreen and programmable cycles. It displays process parameters and supports multi-level loading. This description and image refer to the F20 version with four MoSi₂ elements documented in the 2023 manual.

TEMPERATURE1600 °Cmaximum for this version

CONTROL7″touchscreen

MEMORY20user programs

Key advantages

The touchscreen displays target and actual temperature.
Programmable curves define the processing stages.
Four MoSi₂ elements heat the chamber.
Three trays support multi-level loading.
A Type B thermocouple monitors the working temperature.
Remaining-time and fault-code displays assist cycle monitoring.

Technical specifications

Data version	F20, MoSi₂, manual 2023
Maximum temperature	1600 °C
Heating elements	4 × MoSi₂
Thermocouple	Type B
Display	7″
User programs	20
Trays	3
Capacity per tray*	Up to 40 single crowns
Rated power	2000 W
Mass	64 kg
Power supply	220 V ±10%, 50/60 Hz; confirm version
Process monitoring	Temperature, time and fault codes

Application and configuration

Use with zirconia approved for the selected temperature schedule. The manual lists the furnace, loading base, three trays with lids, beads, tweezers and power cable. Confirm the supplied kit and electrical version before delivery. Up to 40 single crowns per tray is a conditional manufacturer limit, not guaranteed capacity for every restoration geometry.

Zirconia sintering furnaces

Compare with: Ivoclar Programat S2.

UP3D F20 manufacturer user manual, PDF

259 231.00 грн

Quick order

Advice

Do you have any questions about the product? Write to us on WhatsApp / Viber / Telegram

	Quantity	Total

Total 0.00 грн Proceed to checkout