|
Quantity
|
Total
|
||
|
|
|||
|
|
|||
Snaige Medical LF10SD-P6000E2 — a laboratory freezer with a solid door for controlled storage of medicines, research samples, reagents and other materials whose instructions specify a temperature of -10…-25 °C. Gross capacity is 100 L; net capacity is 98 L.
TEMPERATURE-10…-25 °C
CAPACITY100 / 98 L
DOORSSolid door
Key benefits
- Electronic controls with an LED display and adjustable operating temperature.
- Static cooling in the -10…-25 °C range.
- Visual and audible alarms and backup power for the controller during a mains failure.
- Bluetooth data logging, an RS485 interface and an external probe port.
- Solid steel door, self-closing with a 90° hold-open position, with a mechanical lock for controlled access.
- 3 evaporator shelves with a load capacity of up to 40 kg per shelf.
- Manual defrost as specified for this model.
Technical specifications
| Model | LF10SD-P6000E2 |
|---|---|
| Equipment type | Laboratory freezer |
| Door type | Solid steel door, self-closing with a 90° hold-open position, with a mechanical lock |
| Gross / net capacity | 100 / 98 L |
| Temperature range | -10…-25 °C |
| Factory setpoint | -18 °C |
| Temperature fluctuation / gradient | 2.9 / 5.3 °C |
| Operating ambient temperature | +10…+35 °C |
| Noise level | 38 dB |
| Cooling system | Static |
| Refrigerant | R600a |
| Controls | Electronic, LED display |
| Data logging and transfer | Mobile application via Bluetooth; RS485 interface |
| Temperature alarm | Visual and audible |
| Power failure alarm | Immediate; controller and alarms operate for at least 24 hours |
| External alarm connection | Yes, potential-free contact |
| External probe port | Yes, 12.5 mm diameter |
| Defrost | Manual |
| Shelves | 3 evaporator shelves |
| Shelf dimensions | 387 × 356 mm |
| Maximum load per shelf | 40 kg |
| Shelf material | Galvanised steel |
| Energy consumption | 0.620 kWh / 24 h; 226 kWh / year |
| Power supply | 220–240 V / 50 Hz |
| External dimensions (H × W × D) | 870 × 560 × 620 mm |
| Internal dimensions (H × W × D) | 690 × 407 × 380 mm |
| Packed dimensions (H × W × D) | 950 × 570 × 640 mm |
| Net / gross weight | 34 / 37 kg |
| Cabinet / chamber materials | Exterior: painted steel; interior: HIPS polystyrene |
| Feet / castors | 2 adjustable front feet and 2 rear supports |
Application and limitations
LF10SD-P6000E2 is intended for healthcare facilities and laboratories that need low-temperature storage at -10…-25 °C. Check the storage requirements for each medicine, sample or reagent against its manufacturer documentation. Suitability of the freezing mode and rate for a specific process must be confirmed separately; the need for an independent temperature logger is determined by the facility requirements.
Compare specifications: Snaige Medical Freezer LF27SD-P6000EQ (−30 °C, 232 L)